Some of us still prefer XP over 7, and yes, it is possible to use XP x64 on a Mac Pro. Here’s how.
First off, I’m assuming you’ll want to at least dual boot the Mac Pro between OS X and Windows. Why not? The thing has 4 hard drive bays, and if you can afford it at all, filling up those bays is the least of your expenses.
First off, the model of your Mac Pro is important in determining how it works. I’ve set up earlier models circa 2006 and they had zero problems assuming you found the right drivers. More on that in a minute. The latest model, late 2009/early 2010 will install fine, drivers will install fine, and it will seem to work fine, until you get a blue screen. Sometimes you’ll get a blue screen before you can install drivers… sometimes it’s much later. If you have a quick enough eye, you’ll catch that the blue screen has to do with the disk.sys driver. The fix is simple: Make sure the drive XP is on is connected to the first SATA port on the logic board. By default, the DVD/ROM is connected to the first SATA port. This causes the blue screen. Switch them, and you’re set.
...